Reflections Craft
Sign In

· 9 min read

Bridal Jewellery Guide for the Wedding Day: What to Wear

A bridal jewellery guide for the wedding day: how to match earrings and necklace to your neckline, what to do with the ring, and what is worth the money.

For the wedding day, pick pieces that suit your neckline, your hair and the rings you are already wearing. Choose one main piece, which is usually earrings or a necklace, keep everything else quiet, and stick to one metal colour so the rings, earrings and any pendant read as a set. Buy early, wear everything at least once before the day, and only spend serious money on pieces you will keep wearing after the wedding.

Start With the Rings, Because Everything Else Follows Them

The engagement ring and wedding band are the only pieces you will definitely wear in every photo, so they set the metal colour for the rest of the day. If your ring is white gold or platinum, white-metal earrings and a white-metal chain will look right beside it. A yellow gold ring with platinum earrings isn't wrong, but in close-up photos of hands near the face the mismatch shows up more than you would expect.

Which hand, and in what order

Tradition in Canada is the fourth finger of the left hand. Many people move the engagement ring to the right hand for the ceremony so the band can go on first, then stack the engagement ring back on top afterwards, which leaves the band closest to the heart. It's a custom, not a rule. What matters in practice is that you don't end up fumbling a ring off during the vows. Settle it during the rehearsal.

Make sure the band actually sits against the ring

If you haven't bought the wedding band yet, take the engagement ring with you or compare profiles carefully. A low-set solitaire often needs a curved or notched band to sit flush. A high cathedral setting usually leaves room for a straight band. Expect a gap between the two in photos if they don't fit together. Some people like the gap, but it's better to choose it than to find it out on the day.

Match Earrings and Necklace to the Neckline

Most wedding-day jewellery mistakes come from treating the neckline as an afterthought. The dress decides how much skin sits between the jaw and the bodice, and that space is what the jewellery fills.

NecklineNecklaceEarringsWhy
Strapless or sweetheartPendant or fine line necklace on a 16–18 inch chainStuds or small dropsLots of open skin, so a necklace has somewhere to sit
V-neckPendant on an 18 inch chain, drop landing above the VStuds or slim dropsThe pendant echoes the V shape instead of fighting it
Off-shoulder or bardotShort necklace or noneDrops or small hoopsThe neckline is already wide, so the face benefits more
High neck, halter or lace collarNoneStatement drops or larger studsA chain would sit on top of the fabric and catch
Square neckShort pendant or line necklaceStudsClean lines suit simple, symmetrical pieces
Open backShort necklace in front, or noneDrops, especially with hair upSome people turn a long pendant to hang down the back

A few practical points the table can't cover:

  • Hair up or down changes the earrings. An updo shows the whole ear and neck, so drops work. Long hair worn down hides studs completely, and you may want something with a little length.
  • Lace and beading snag prongs. Check where a pendant or drop earring will rest. If it touches embellished fabric, a bezel or low-profile setting is safer than claws.
  • Veils catch on things too. A cathedral veil pinned near the ears will catch on large hoops and chandelier earrings. Try the veil with the earrings at a fitting, not on the morning.

Choose One Main Piece and Keep the Rest Quiet

Dressing with one main piece is the most reliable rule I know. If you're wearing diamond drop earrings, a plain necklace or no necklace lets them stand out. If you're wearing a pendant, studs are enough. Big earrings, a statement necklace and a bracelet together with a sparkling engagement ring usually look busy in photos, and it's harder still with a beaded dress.

Earrings

Studs are the safest choice and the one you're most likely to keep wearing. If you want drops, try them on before buying and turn your head quickly. A drop that swings too much will blur in photos and feel heavy by the evening. Our earrings range covers studs, drops and hoops if you want to compare shapes side by side.

Necklaces

A necklace for the wedding day doesn't need to be expensive to look right. Sitting at the correct length for the neckline matters far more than diamond size. Measure from the base of the throat to where you want the piece to sit while wearing the dress or a top with the same neckline. A 16 inch chain sits near the base of the neck on most people and 18 inches near the collarbone, but neck size varies enough that you should measure rather than guess.

Bracelets

Skip the bracelet if your dress has long lace sleeves, because the clasp and settings will pull threads. With short sleeves or bare arms, a slim line bracelet works and it shows up in ring photos. Keep it light. You'll be holding a bouquet, signing papers and hugging a lot of people.

What Is Worth the Money and What Isn't

On jewellery for one day, I'll be blunt: higher grades often make no visible difference.

Take diamond clarity. GIA's clarity scale describes VS1 and VS2 as "Inclusions are observed with effort but can be characterized as minor," and SI1 and SI2 as "Inclusions are noticeable." Those descriptions refer to a grader looking under 10x magnification. GIA also notes that "Many blemishes and inclusions are not visible to the naked eye." For small stones in earrings or a pendant, viewed from conversation distance or by a camera across the room, the step up from a good SI to VS usually won't show. Whether a particular SI stone is eye clean depends on that stone, so look at it or ask for images. Don't assume the grade answers the question either way.

Here's where I would and wouldn't spend:

  1. Spend on the rings. You'll wear them every day for decades, so put the money into the diamond's cut and the setting's build quality.
  2. Spend moderately on earrings you'll wear again. Good studs get worn for years. Drops that only suit a wedding dress probably won't.
  3. Spend little on a necklace that exists for one neckline. If the dress needs a very specific length or style you won't wear again, keep it simple and inexpensive.
  4. Don't pay for colour and clarity you can't see. In small side stones and pendants, a near-colourless grade with a clean look is enough for most people.
  5. Spend on fit and security. A secure clasp and earring backs that stay put matter more than a higher grade nobody will notice.

Lab-grown is a reasonable choice for wedding pieces

If you want more diamond for the same budget, lab-grown stones are a sound option. In the United States, the FTC's Jewelry Guides at 16 CFR 23.12 say laboratory-created diamonds can be described with a clear qualifying disclosure, giving examples such as "laboratory-created," "laboratory-grown," or "[manufacturer name]-created," that conveys "the product is not a mined stone." That is a US rule rather than a Canadian one, but the principle is useful anywhere. Whatever you buy, the paperwork and description should say plainly whether the stone is natural or lab-grown.

Check the Metal Marks

If you're mixing pieces from different places, such as a borrowed necklace, an heirloom bracelet and new earrings, look at the quality marks. Under Canada's Precious Metals Marking Regulations, gold may not be marked with a karat quality below 9 karats. Platinum marks such as "platinum," "plat." or "platine" require 95 per cent or more of the metallic content. Sterling silver must contain 925 parts per 1,000 pure silver. The regulations also set tolerances, so gold can be slightly below the marked quality within the stated limits.

This matters on the day for two reasons. First, sterling silver and white gold sit close in colour, but silver tarnishes and looks greyer beside freshly polished white gold or platinum. Second, rhodium-plated white gold and platinum can look slightly different when worn side by side. If the earrings and rings will appear together in close-up photos, look at them together in daylight before the wedding.

Wedding-Day Care: The Small Things That Go Wrong

Most wedding-day jewellery problems are mechanical, not aesthetic. A few habits prevent nearly all of them:

  1. Put jewellery on last. Hairspray, setting spray, self-tan and body lotion leave a film that dulls diamonds. Get dressed, finish hair and makeup, then put the pieces on.
  2. Clean the rings the week before. GIA's care guide says diamonds "can be cleaned safely with lint-free cloths, commercial jewelry cleaning solutions, and household detergents," and cautions that "Ultrasonic cleaners and steam cleaners can loosen gemstones in their settings." A soak in warm water with mild dish soap and a soft brush is enough.
  3. Have the prongs checked a few weeks before. A jeweller can spot a lifted claw in a minute. Book it early enough to repair anything they find.
  4. Give the rings to one person. Choose one person for the bands, with a box rather than a pocket, and keep the engagement ring on your hand unless you plan to swap hands.
  5. Swap earring backs if they're loose. Friction backs that have softened over the years can fail during hugs and dancing. Replace them or move to a screw or locking back.
  6. Take things off for the messy parts. If you'll be holding sparklers, cutting cake or doing a dance-floor shoe change, take bracelets off first.

What to Do Next

Start with the dress and the rings, since those are fixed. Then:

  • Photograph yourself in the dress with your hair styled the way you plan, and decide whether the space at your neck needs a necklace or the ears need more presence.
  • Pick one main piece and keep everything else small.
  • Match metals to your engagement ring, and check the quality marks on anything borrowed or inherited.
  • Wear the full set for an hour at home before the day, including turning your head, hugging someone and sitting down.

If you're still choosing the band, start with the wedding band catalogue and compare profiles against your engagement ring. For more on chain lengths, earring backs and ring care, our other guides go into each one in detail.

Sources

  • Government of Canada, Justice Laws Website. Precious Metals Marking Regulations (C.R.C., c. 1303), consolidated version accessed November 2026. Precious Metals Marking Regulations
  • Gemological Institute of America (GIA). Diamond Clarity, GIA 4Cs, accessed November 2026. GIA 4Cs: Diamond Clarity
  • Gemological Institute of America (GIA). Diamond Care and Cleaning Guide, accessed November 2026. GIA Diamond Care and Cleaning Guide
  • U.S. Federal Trade Commission. Guides for the Jewelry, Precious Metals, and Pewter Industries, 16 CFR § 23.12 "Definition and misuse of the word 'diamond'", via Cornell Law School Legal Information Institute, accessed November 2026. 16 CFR 23.12