· 8 min read
What Is HPHT Treatment on a Natural Diamond?
Diamond HPHT treatment on natural stones explained: which diamonds can be treated, how labs detect it, what reports say, and when a treated stone makes sense.
HPHT treatment puts a mined diamond back under high pressure and high temperature. Usually the aim is to remove a brownish or greyish tint so the stone looks colourless. The diamond is still natural but its colour is not, and a proper lab report will say so. It only works on a small, specific group of natural diamonds, and spotting it takes laboratory instruments. A loupe won't do it.
The rest of this guide covers which stones can be treated, how the labs catch it, what the paperwork should look like, and when a treated stone is a reasonable buy.
What HPHT actually does to a mined diamond
HPHT stands for high pressure, high temperature. The same kind of presses used to grow lab-grown diamonds can also heat-treat (anneal) a natural one. GIA's 2020 study Natural-Color D-to-Z Diamonds: A Crystal-Clear Perspective says that "most commercial HPHT treatments are conducted in the 1900–2100°C range." It adds that most treated stones are heated enough to end up in the colourless D to F range.
What happens inside the stone depends on its chemistry:
- Brown or grey type II stones can be lightened, often all the way to colourless. This is the main commercial use.
- Brown-pink stones can have the brown reduced while the pink stays, according to the same GIA study.
- Nitrogen-rich type Ia stones can change colour instead of losing it. A GIA lab note from spring 2022 describes a 5.20 ct Fancy Dark yellowish brown stone. It came back from treatment as a 5.17 ct Fancy Deep yellow-orange, three points lighter.
The same 2022 note states that "HPHT treatments are permanent." That matters. Unlike a fracture filling, the colour will not come out in an ultrasonic cleaner or under a jeweller's torch.
Which natural diamonds can be treated
Most buyers never hear this part: HPHT can't be done to just any diamond. GIA's 2020 study puts it plainly: "only type II and the rare type IaB diamonds may be HPHT treated to remove or reduce brownish or grayish coloration."
Diamond "type" is a scientific category based mostly on how much nitrogen the crystal holds and how that nitrogen is arranged. Most reports don't list it as a grade, but it decides whether a stone can be treated this way. In GIA's large sample of natural D-to-Z diamonds, the split looked like this:
| Diamond type | Share of GIA's natural D-to-Z sample (2020 study) | Can HPHT remove brown or grey? |
|---|---|---|
| Type Ia / IaAB | 99.06% | No, but the colour can be shifted (for example brown to yellow) |
| Type IIa | 0.83% | Yes |
| Type IaB | 0.09% | Yes |
| Type IIb | 0.02% | Yes |
Of the HPHT-treated stones GIA examined over the previous decade, 97.8% were type IIa. Treated stones also tended to be large: 11% of the treated set was over 5 carats, against 6% of untreated natural type IIa stones.
What this means for an ordinary purchase
The odds are on your side. Say you are buying a 1 carat round with a report from a major lab. The stone is very likely type Ia, so it was never a candidate for treatment to colourless. The risk climbs when three things come together: high colour (D to F), high clarity and larger size. GIA also notes that low-clarity stones generally don't benefit from treatment, because existing fractures can crack further or turn to graphite under the heat. A big, clean, very white natural diamond is exactly the kind of stone whose paperwork deserves a careful look.
How the labs detect it
You can't see HPHT treatment with your eyes or a 10x loupe, and a handheld diamond tester won't help either. Those testers tell a diamond from an imitation. They say nothing about where the colour came from.
Detection is a lab job, and it happens in stages. GIA's 2020 study says an infrared spectrometer quickly identifies diamond type, which clears the roughly 99% of stones that could not have been whitened this way. But the study also warns that "IR analysis cannot determine the color origin of a diamond." For type II and IaB stones, it says "the color origin of such diamonds should be confirmed by a gemological laboratory." The confirming tests use spectroscopy. The main one is photoluminescence at very low temperature, where the lab compares the strength of specific peaks in the stone's spectrum.
HRD Antwerp describes the same screening on its diamond grading reports page: "The first step is to determine if your diamond is natural, laboratory-grown or treated. If a diamond does not pass the initial test, it will be directed to our research department to further determine its nature."
The evidence leaves some things open. Detection keeps changing, because treaters adjust their methods and labs adjust theirs in response. A jeweller can't do it at the counter, and I would not assume every small lab is equally equipped for it.
Why the report and inscription matter more than the stone
The real risk with HPHT isn't the treatment itself. It's a treated stone sold as untreated, and GIA has published several cases.
In a spring 2018 lab note, a 6.30 ct F colour HPHT-treated diamond was passed off as the untreated stone from a GIA report issued a few months earlier. It even carried a fake girdle inscription. Infrared testing showed it was type IIa, while the original stone was type Ia.
In a fall 2021 lab note, GIA's Antwerp lab received a 1.497 ct E IF diamond. It was inscribed with the report number of a 1.502 ct D IF untreated diamond graded in 2010. GIA's records showed this treated stone had been inscribed "BELLATAIRE" in 2013 to mark its HPHT treatment, and that someone had since repolished the girdle to remove that inscription. GIA issued a new report, made the false inscription unreadable and inscribed the stone "TREATED COLOR." The authors say this kind of fraud is "common in the marketplace," along with lab-grown stones carrying natural-diamond inscriptions.
There are two lessons here. First, a weight and grades that nearly match a report don't prove you are holding that stone. Second, the cheapest protection on an expensive natural stone is the lab's own verification service, which re-examines the diamond against its earlier report.
Disclosure rules and what a treated stone is worth
In the United States, the FTC's jewellery guides cover this in 16 CFR § 23.24. Sellers must disclose a gemstone treatment if it is not permanent, if it creates special care needs, or if it "significantly affects the value" of the stone. The note to that section says that for online sales, the disclosure should appear in the product description itself. HPHT is permanent and needs no special care, so the value test is the one that applies. The labs clearly treat it as affecting value, which is why they inscribe and report it.
For Canada, I couldn't find a current federal rule on diamond treatment disclosure that I could read and cite directly, so I won't quote one. In practice the advice is the same: ask for a full report from a recognised lab and read what it says about colour origin.
I'm not going to give you a discount percentage either. I couldn't find a published, dated market figure from an authoritative source, and prices for treated stones vary with size, colour and seller. These points hold without a number:
- A treated natural diamond should cost a good deal less than an untreated one with the same grades. If it doesn't, walk away.
- Resale is weaker, because many buyers and dealers won't take a stone with treated colour.
- If the appeal is "colourless and natural for less," a lab-grown diamond often gives you a whiter, cleaner stone for even less money, with no disclosure surprises later. Our other guides cover the lab-grown versus natural trade-off in detail.
The honest case for an HPHT-treated natural diamond is narrow. It fits if you want an earth-mined stone, you want a large, white look, and you accept that people improved its colour. That's a fair choice, as long as you pay a treated-stone price for it.
How to protect yourself when buying a natural diamond
- Get a full report from a major lab and read every line, especially the comments. Look for anything about colour origin, treatment or HPHT processing.
- Check that the inscription matches the report number, then look the report up on the lab's own website. Don't rely on a PDF someone sends you.
- Take the most care with large D to F, high-clarity stones. GIA's data shows these are the ones most often treated.
- For a big purchase or a resold stone, use the lab's verification or update service so the diamond itself is checked against its report.
- Ask the seller in writing whether the stone is untreated. A good seller will answer straight away.
What to do next
If you are shopping for a natural centre stone, start in our loose diamond search. Open the grading report for every stone on your shortlist and check what it says about colour origin before you compare prices. Once you have a diamond you trust, choose one of our engagement ring settings and preview the finished ring in 3D before ordering. If anything on a report is unclear, ask us before you buy, not after.
Sources
- Gemological Institute of America, Eaton-Magaña, S., Ardon, T., Breeding, C. M. and Shigley, J. E., "Natural-Color D-to-Z Diamonds: A Crystal-Clear Perspective," Gems & Gemology, Fall 2020. GIA
- Gemological Institute of America, Ruan, S., "HPHT-Processed Natural Type Ia Diamond," Gems & Gemology Lab Notes, Spring 2022. GIA
- Gemological Institute of America, Law, B., "HPHT-Processed Diamond Fraudulently Represented as Untreated," Gems & Gemology Lab Notes, Spring 2018. GIA
- Gemological Institute of America, Barrie, E., Teuthof, S. and Eaton-Magaña, S., "HPHT-Processed Diamond with Counterfeit GIA Inscription," Gems & Gemology Lab Notes, Fall 2021. GIA
- U.S. Federal Trade Commission, Guides for the Jewelry, Precious Metals, and Pewter Industries, 16 CFR § 23.24, "Disclosure of treatments to gemstones," via Cornell Legal Information Institute. Cornell LII
- HRD Antwerp, "Diamond Grading Reports," accessed November 2026. HRD Antwerp