· 8 min read
Is an Ultrasonic Cleaner Safe for Diamonds? A Bench View
Is an ultrasonic cleaner safe for diamonds? Usually, for an untreated stone in a sound setting. Here is when it isn't, per GIA and AGS, and what to do instead.
An ultrasonic cleaner is generally safe for an untreated diamond with no large surface-reaching breaks, as long as its setting has just been checked. The bigger risk is usually to the setting. The vibration can loosen stones, and it can also damage fracture-filled diamonds and stones with deep feathers. So the honest answer is "usually yes for the diamond, sometimes no for the piece."
What an ultrasonic cleaner actually does
GIA describes it plainly: "An ultrasonic cleaner sends high-frequency sound waves through a liquid solution to remove the dirt and build-up" (GIA 4Cs, How to Clean Your Diamond Jewelry). That energy scrubs every surface in the tank. This is why the machine reaches places a toothbrush can't, such as under a basket, behind a halo or between the links of a tennis bracelet.
The scrubbing acts on everything in the tank. The machine can't tell hand cream under a gallery from a slightly lifted prong tip. It shakes both.
The diamond itself is very stable. GIA's care guide says diamonds are "invulnerable to virtually all acids" (GIA, Diamond Care and Cleaning Guide). Chemistry is not the problem. There are three real problems. A diamond can break along weaknesses it already has. Some diamonds carry treatments that are less durable than the diamond. And metal settings wear.
What GIA and the American Gem Society say
Most jewellers rely on these two sources, and they don't say quite the same thing. It's worth reading both.
GIA: a tool for jewellers, not for home
GIA's consumer care guide says: "Ultrasonic cleaners and steam cleaners can loosen gemstones in their settings." It goes further: "Harsher cleaning methods are not recommended for home use. These include powdered abrasive household cleansers, ultrasonic cleaners, and steam cleaners" (GIA, Diamond Care and Cleaning Guide). In short, GIA treats the machine as a professional tool, run by someone who checks the setting before and after.
GIA's separate article on gems and ultrasonic cleaners repeats the warning about settings: "Check to make sure the gemstones in your piece are securely set in their mountings both before and after cleaning. The vibration generated by an ultrasonic cleaner can sometimes shake gems loose" (GIA 4Cs, Gems and Ultrasonic Cleaners, 2015).
AGS: possibly fine at home, with a caveat
The American Gem Society's consumer brochure is a little more permissive: "Home ultrasonic cleaners are best used for karat gold jewelry without gemstones. The ultrasonic also may be suitable for some diamond-set jewelry; however, the intense vibrations can loosen gems" (American Gem Society, Care for Your Jewelry).
Read side by side, the two agree on how the damage happens and differ on who should run the machine. Neither says ultrasonic cleaning harms a sound, untreated diamond. Both say it can loosen the metal that holds the diamond. That matches what I see at the bench. When a ring comes out of the tank with a problem, it is almost always a stone that was already loose and finally came out.
When an ultrasonic is a bad idea
In these cases I keep a piece out of the tank, or at least stop and look first.
- Fracture-filled diamonds. GIA describes fracture filling as "infusing molten leaded glass-like substance into a diamond's fractures". It warns the treatment can be compromised during "jewelry repairs, or if subjected to repeated cleanings with steam, acid or ultrasonics" (GIA 4Cs, Diamond Treatments and What They Mean to You, 2014). GIA researchers tested filled stones from three treatment firms. They reported that "some stones were adversely affected by some standard cleaning procedures and wear conditions" (Kammerling et al., Gems & Gemology, Fall 1994).
- Diamonds with large or deep feathers. GIA defines a feather as a "general trade term for a break in a gemstone, often white and feathery in appearance" (GIA 4Cs, Diamond Inclusions Defined, 2013). It also says "very deep feathers that extend from the crown to the pavilion, or that penetrate about one-third of the way or more into the diamond, could pose durability concerns" (GIA 4Cs, Seven Things You Need to Know About Diamond Clarity, 2018). I keep these stones out of the tank. To be straight with you, I haven't found a lab study that measures how much extra risk an ultrasonic adds to a feathered stone. That caution is a jeweller's judgement, not a published figure.
- Any stone that moves. Hold the piece near your ear and tap it gently. A faint click or rattle means a stone is loose. Have it fixed first, then clean it.
- Worn prongs. A prong tip may be flat, shiny or visibly thinner than its neighbours. If so, the vibration is one more reason it may give way.
- Mixed pieces. This means a diamond piece that also has pearls, coral, lapis or a dyed stone. AGS is blunt: "DO NOT use the ultrasonic cleaner on porous gems such as lapis, coral, pearl, or dyed gemstones."
Piece by piece: how I'd treat it
| Piece | Ultrasonic? | What to watch |
|---|---|---|
| Solitaire with an untreated diamond and recently checked prongs | Generally fine | Check the stone for movement before and after |
| Halo or pavé band | With care | Dozens of small stones held by tiny beads or prongs; check under a loupe afterwards |
| Tennis bracelet | With care | Many settings plus a clasp; a stone that is already loose will often show itself |
| Diamond with a large or deep feather | I'd avoid it | Clean by hand instead |
| Fracture-filled (clarity-enhanced) diamond | No | GIA lists ultrasonic cleaners among the risks to the filler |
| Diamond set with pearl, coral, lapis or dyed stones | No | AGS says not to put porous gems in the tank |
All of this applies to lab-grown diamonds too. GIA says lab-grown stones have "nearly the same chemical, optical and physical properties as natural diamonds" (GIA 4Cs, Simulants, Moissanite and Lab-Grown Diamonds). Make the same checks: read the report for treatments, look at the feathers and check the setting.
How to check before you clean
If you own a home ultrasonic and want to use it, this is the routine I'd follow.
- Read the grading report. GIA says "A GIA grading report is your best bet that the diamond you're purchasing has been thoroughly tested and examined for any detectable diamond treatments" (GIA 4Cs, Diamond Treatments and What They Mean to You). If the report mentions clarity enhancement or filling, skip the ultrasonic.
- Look at the plotted inclusions. Some reports include a diagram of the inclusions. If it shows a long feather, or one running from the crown deep into the stone, clean by hand.
- Check every stone for movement. Press gently on the centre stone with a wooden toothpick. On pavé, look under good light for any stone sitting lower than the rest or tilted.
- Inspect the prongs. Look for flat, thin or lifted tips, especially if the ring has been catching on knitwear.
- Run the shortest cycle the manufacturer suggests. Put the piece in the basket rather than on the bottom of the tank.
- Check again afterwards. GIA's own instruction is to check settings "both before and after cleaning."
The cheaper option is usually enough
Most people don't need a home ultrasonic at all. GIA's home method uses an ammonia-based household cleaner and a soft toothbrush: "soak each diamond in an ammonia-based household cleaner (such as window cleaner) overnight, once a week. The next morning, remove the diamond from the cleaner and brush it with a soft, clean toothbrush" (GIA 4Cs, How to Clean Your Diamond Jewelry, 2012). The same page warns that chlorine bleach and abrasives such as toothpaste "should never be used when cleaning diamonds, especially those set in jewelry." Work over a closed drain or a rubber mat.
The soak and brush remove the film of skin oil and lotion on the underside of the stone, and that film is what actually dulls a diamond. What they can't do well is clear packed grime from under a tight basket or inside a hidden halo. For that, a professional clean is the better answer, because someone also looks at the prongs. The American Gem Society suggests visiting a jeweller "at least twice a year for professional cleaning," where "the jeweler will check the prongs for wear and security" (American Gem Society, Care for Your Jewelry).
My plain view: if you already own an ultrasonic, use it only on sound, untreated pieces, and check them before and after. If you don't own one, I wouldn't buy one for a single engagement ring. A weekly soak, a soft brush and a professional check twice a year will do the job.
What to do next
If you're choosing a diamond now, read the treatment and inclusion sections of the report before you buy, so you know how the stone can be cared for. You can compare report details in our loose diamond search and pick a setting with sturdy prongs from our engagement ring settings. For more care and buying guides, see the Reflections Craft blog.
Sources
- Gemological Institute of America (GIA). "Diamond Care and Cleaning Guide." gia.edu/diamond-care-cleaning
- GIA 4Cs. "How to Clean Your Diamond Jewelry." 2012. 4cs.gia.edu/en-us/blog/how-to-clean-your-diamond-jewelry
- GIA 4Cs. "Gems and Ultrasonic Cleaners." 2015. 4cs.gia.edu/en-us/blog/gems-ultrasonic-cleaners
- GIA 4Cs. "Diamond Treatments and What They Mean to You." 2014. 4cs.gia.edu/en-us/blog/diamond-treatments-mean
- GIA 4Cs. "Diamond Inclusions Defined." 2013. 4cs.gia.edu/en-us/blog/diamond-inclusions-defined
- GIA 4Cs. "Seven Things You Need to Know About Diamond Clarity." 2018. 4cs.gia.edu/en-us/blog/seven-things-to-know-about-diamond-clarity
- GIA 4Cs. "Simulants, Moissanite and Lab-Grown Diamonds." 4cs.gia.edu/en-us/simulants-moissanite-and-lab-grown-diamonds
- Kammerling, R.C., McClure, S.F., Johnson, M.L., Koivula, J.I., Moses, T.M., Fritsch, E. and Shigley, J.E. "An Update on Filled Diamonds: Identification and Durability." Gems & Gemology, Vol. 30, No. 3, Fall 1994. gia.edu/gems-gemology/fall-1994-diamond-treatment-kammerling
- American Gem Society. "Care for Your Jewelry" (consumer brochure). American Gem Society PDF