· 7 min read
Lab Grown Diamond Post Growth Treatment, Explained
Lab grown diamond post growth treatment is common, especially in CVD stones. What it does, how GIA and IGI reports word it, and when it should matter.
A lab grown diamond post growth treatment is any process used after the crystal leaves the grower to change its colour. The most common one is high-pressure, high-temperature (HPHT) annealing, which takes the brown tint out of a CVD-grown stone. It is routine. GIA reports that about 80% of the CVD diamonds it has seen since 2020 were processed after growth. For most buyers of a colourless lab stone, treatment does not change how the diamond looks or wears. It is still worth reading your report so you know what you are paying for.
What post-growth treatment actually is
Lab-grown diamonds are made in one of two ways. HPHT growth recreates heat and pressure in a press. CVD (chemical vapour deposition) builds the crystal up layer by layer from a carbon-rich gas. Either way the rough is real diamond, but it does not always come out the colour the producer wants.
Treatment comes next. GIA's explainer on its Laboratory-Grown Diamond Report says: "The HPHT method can be used to treat the color of laboratory-grown diamonds." It adds that this can produce colourless stones or fancy colours such as pink, blue, green or yellow.
The main processes
GIA research staff describe several post-growth processes in a 2024 Gems & Gemology review of lab-grown diamonds:
- HPHT annealing. "CVD-grown diamonds can be enhanced using HPHT treatments to reduce or remove the brown coloration." The same article says these treatments run hotter than HPHT growth (above 1600°C) and do not add any new diamond material.
- LPHT annealing. In low-pressure, high-temperature treatment, stones "are annealed at similarly high temperatures under vacuum or an inert gas." This can also shift the colour of a CVD stone.
- Irradiation. This is used mostly in fancy-colour work. GIA also notes that low-dose irradiation can reduce phosphorescence in HPHT-grown stones.
Treatment changes the colour. It does not change the carbon, the hardness or the cut. A treated lab diamond is still a diamond.
Why so many CVD diamonds are treated
This is about factory economics, not hiding anything. The same GIA review explains that "some CVD-grown diamonds have a brown coloration after growth, associated with the presence of vacancy clusters." Growing faster tends to produce more brown. So producers can "use recipes that promote rapid growth of diamond layers, even if it results in a brown coloration," and then fix the colour afterwards. GIA notes this route "may be faster, easier, or more cost-effective than directly producing a colorless diamond using CVD."
That is why the CVD figure is so high: "since 2020, approximately 80% of the CVD diamonds submitted to GIA have undergone post-growth processing." Large stones get treated too. GIA's lab notes describe a 10.04 ct G VS2 emerald-cut CVD diamond that had been HPHT-treated, which the author called noteworthy for a stone over 10 carats.
Two caveats. First, the 80% is a share of the stones sent to GIA, not of every lab diamond made. Second, GIA's review gives no matching figure for HPHT-grown stones, so I won't guess one.
How grading reports say it
This is where buyers get confused. Each lab words treatment differently, and the wording has changed over time.
GIA
GIA's full Laboratory-Grown Diamond Report states both the growth method and any post-growth treatment. According to Rapaport's report on the change, from early March 2021 GIA reports have said whether there is evidence of a colour treatment or no evidence of one. Before that, they carried a general note that the stone "may" have been treated. Where the lab cannot tell, the report reads: "Whether this man-made diamond has been treated is currently undeterminable."
There is a catch. GIA's cheaper Dossier version drops these fields. GIA's FAQ on the Dossier change describes this as "removing the growth type and post-growth treatment options." A Dossier gives you the grades but doesn't say how the stone was grown or whether it was treated.
IGI
IGI changed its reports in January 2021. Diamonds.net reported the change, and the Gem and Jewelry Institute of Thailand republished that report. Under the new wording, untreated CVD or HPHT stones are described as "as grown with no indication of post-growth treatment." CVD stones that IGI cannot confirm as untreated keep the older wording, which says they "may include post-growth treatments to alter color."
What the report lines mean in practice
| Report wording you may see | What it tells you | What it does not tell you |
|---|---|---|
| "As grown" / no indication or no evidence of post-growth treatment | The lab found no sign the colour was changed after growth | Anything about beauty, cut quality or durability |
| Evidence or indications of post-growth treatment | The colour was changed after growth, usually by HPHT annealing | The exact process or how many cycles |
| "May include post-growth treatments" or "currently undeterminable" | The lab could not confirm either way | That the stone is treated. Treatment just couldn't be ruled out |
| GIA Dossier (no treatment field) | Colour and clarity grades, plus cut grade where it applies | Growth method or treatment status |
Does a treated lab diamond look or wear differently?
From the evidence I have read, a treated colourless stone shows no meaningful difference in daily wear. The colour grade on the report is the colour after treatment, so a G is a G either way. HPHT treatment is a heat process, not a coating, so there is nothing on the surface to polish off or wear away.
GIA's 2024 review adds two reassuring points. Stones submitted more than once "showed no significant or systematic change in color grade." Some blue or grey CVD stones did shift colour under strong UV, but that change was "temporary and fully reversible." For that reason GIA tests the colour stability of those stones by exposing them to white light for at least 30 minutes.
The evidence can't yet tell us how treated stones behave over many decades, because large-scale CVD production is fairly young. I wouldn't worry about it for a colourless stone, but I also won't claim a century of track record.
Fancy colours are a different case. GIA notes that HPHT treatment is used to produce colours like pink and blue. If you are buying a coloured lab diamond, the treatment line matters more, so ask how the colour was produced.
Should you pay more for "as grown"?
Some sellers now charge a premium for untreated lab diamonds. Ask what that premium actually buys.
Picture two stones with the same colour, clarity and cut grades that look the same under the same light. The treated one is not a lesser diamond to look at. Paying extra for "as grown" makes sense if it matters to you on principle, the way some people prefer an untreated sapphire. It does not make sense as an upgrade in sparkle or durability, because there is no evidence that it is one. It is also no resale argument, so don't let anyone sell "as grown" to you as an investment feature.
Treatment status does matter in these cases:
- You want full disclosure on paper. Choose a full GIA Laboratory-Grown Diamond Report or an IGI report that states treatment, not a Dossier.
- You are buying a fancy colour. Ask how the colour was created and check the report line before comparing prices.
- You are comparing two near-identical stones. Choose on cut and appearance first. Treatment status is a tiebreaker.
- The report says "undeterminable" or "may include." Read that as "possibly treated" and compare it against stones that have a clear statement.
How to check a stone before you buy
When you search loose lab-grown diamonds, open the actual report for each stone on your shortlist. Don't rely on a summary. Check three things: the lab's name, whether the growth method (CVD or HPHT) is listed, and the exact treatment wording. Then look up the report number on the lab's own website, because that record is the one that counts.
Once you have a stone, pair it with a setting from our engagement ring collection and preview the finished ring in 3D. Treatment status won't show in a render or on the hand, so put your attention on cut, size and the setting. When you are happy, finish the ring with metal, size and any engraving.
What to do next
Pick two or three lab diamonds with the same colour and clarity grade, ideally one CVD and one HPHT, and read their report lines side by side. If the "as grown" stone costs noticeably more, decide whether that label is worth the difference to you, because it won't show in the ring. For more on how the two growth methods compare, browse our other diamond guides.
Sources
- Gemological Institute of America. Eaton-Magaña, S., Hardman, M.F. and Odake, S., "Laboratory-Grown Diamonds: An Update on Identification and Products Evaluated at GIA," Gems & Gemology, Vol. 60, No. 2, Summer 2024. gia.edu
- Gemological Institute of America. Eaton-Magaña, S., "10 ct HPHT-Treated CVD Laboratory-Grown Diamond," Gems & Gemology Lab Notes, Summer 2022. gia.edu
- Gemological Institute of America. "Laboratory-Grown Diamond Report (LGDR) by GIA," accessed October 2026. discover.gia.edu
- Gemological Institute of America. "What has changed about the Laboratory-Grown Diamond Report – Dossier?," accessed October 2026. gia.edu
- Rapaport. Freedman, J., "GIA Now Giving Details of Lab-Grown Treatments," 16 March 2021. rapaport.com
- Gem and Jewelry Institute of Thailand Information Center, republishing Diamonds.net. "IGI Lab-Grown Reports to Indicate Treatments," 22 January 2021. infocenter.git.or.th