Reflections Craft
Sign In

· 8 min read

Why Are Lab Grown Diamonds So Cheap Now? The Real Causes

Why are lab grown diamonds so cheap now? Production scale, better CVD growth and price pressure, with dated 2026 wholesale data and what it means for buyers.

Lab grown diamonds are cheap now because they are manufactured, and the factories got much bigger and much better at making them. Each year more carats come out of the reactors and presses, while shoppers have kept their spending in the same range. So the price per carat keeps falling. By mid-2026 one widely followed wholesale index had dropped about 96% from its 2018 starting point. That doesn't mean the stones got worse. It means their price now follows what it costs to make them, not how rare they are.

Below is what has actually driven the fall, what the 2026 data shows, and how to use it when you buy.

A natural diamond is found; a lab diamond is made

The price of a natural diamond depends on geology. Someone has to find a deposit, mine it and sort the rough, and that supply can't be scaled up on request. A lab grown diamond is the same material made on a production line.

GIA's consumer guide on laboratory-grown diamonds says lab grown and natural stones share "the same crystal structure, consisting of tightly bonded carbon atoms," which gives them "nearly the same chemical, optical and physical properties." GIA describes the two growth methods this way:

  • HPHT (high pressure, high temperature): a capsule containing carbon and a metal mixture is heated to 1300–1600°C at pressures of 5–6 GPa.
  • CVD (chemical vapour deposition): this runs at "near-vacuum pressure", with carbon "crystallizing as a new diamond at temperatures of 700-1200 °C" on diamond seed plates.

Either way, the cost of a stone comes down to equipment, electricity, seed plates, growth time, cutting and grading. Every one of those costs falls as a factory grows and improves its process. Natural diamonds don't work like that, which is why the two prices have moved so far apart.

Supply grew faster than demand

Production scaled up in China and India

GIA's Summer 2024 Gems & Gemology update on laboratory-grown diamonds cites an industry estimate of 6–7 million carats of gem-quality lab grown diamond produced worldwide in 2020. China made about 3 million carats, mostly by HPHT, and India about 1.5 million, mostly by CVD. The same article says an estimated 4,000–6,000 CVD reactors support India's output, and that most lab grown melee comes from Chinese manufacturers. Those are 2020 figures and capacity has changed since. They still show the scale involved, and you can't build that many reactors and then hold back what they produce.

The process got better, so each stone costs less to make

GIA's update reports a big jump in the size of CVD stones. In the 2000s most CVD submissions were under half a carat. GIA now reports that the majority exceed 3 ct, and the largest faceted CVD diamond it had examined was 75.33 ct. GIA puts this down to "improvements in CVD methods as well as the availability of large diamond substrates."

Colour has also improved. Before 2020 only a small share of CVD submissions graded D, E or F, and 2020 brought a sharp rise in colourless CVD stones. GIA also notes that since 2020 about 80% of the CVD diamonds sent to it had been through post-growth processing, usually an HPHT step to remove brown colour. It adds that this route "may be faster, easier, or more cost-effective than directly producing a colorless diamond using CVD."

Put those changes together and growers now produce bigger, whiter stones with fewer failed runs. That is the main reason prices keep falling.

What the 2026 numbers actually show

The best public wholesale series comes from analyst Edahn Golan, whose quarterly figures are reported in the trade press. These are wholesale numbers in US dollars, not retail prices in Canada, so use them to see the direction prices are moving. Don't read them as a price tag.

Period (Golan wholesale data, as reported by JCK)Year-over-year change
Full year 2025down 26%
Q1 2026down 14%
Q2 2026 (average)down 13%
Q2 2026, 1.50–1.99 ctdown 11%
Q2 2026, 2 ctdown 20%
Q2 2026, 1 ct roundsup 1% for the quarter

Sources: JCK, Lab-Grown Diamond Prices Show Signs of Stabilizing (8 July 2026) and Lab-Grown Diamond Wholesale Prices Are in Freefall; Retail Margins May Be Next (10 August 2026).

Three points from those reports matter to a buyer:

  1. Prices are still falling, but more slowly. JCK reported in July 2026 that the declines started slowing in 2024. The Q2 2026 drop of 13% was smaller than Q1's 14% and well below the 26% for 2025.
  2. Big stones are falling fastest. Golan's explanation, as reported by JCK, is that larger sizes used to carry the widest wholesale margins, so they had the most room to fall when retailers and shoppers pushed back. As 2 and 3 ct stones got cheaper, demand for 1 ct stones softened.
  3. Some growers are pushing prices back up. JCK reported in July 2026 that some Chinese producers had raised rough prices by at least 30% and Diamond Foundry by about 25%. Golan called these "opportunistic moves in a consolidating market," not a sign of rising demand.

Retail has not fallen as far as wholesale

The August 2026 JCK article cites Paul Zimnisky's May 2026 analysis, which put retail markups over wholesale at more than 80%, little changed between 2025 and 2026. It also cites Tenoris data showing that lab grown inventory relative to sales at US jewellery retailers rose from the high single digits in 2020 to nearly 50%. In plain terms, shops are carrying a lot of stock, and the retail price you see often hasn't caught up with wholesale. Comparing loose stones directly is more useful than going by a store's "was" price.

What cheap does and doesn't mean

A low price is not a sign of a fake or a poor stone. Under the US FTC Jewelry Guides, 16 CFR § 23.12, a lab-made stone with essentially the same optical, physical and chemical properties as a mined diamond can be sold as a diamond, but it has to carry a clear qualifier such as "laboratory-grown," "laboratory-created" or "[manufacturer name]-created." In Canada the same rule holds in practice: the paperwork and the listing should say lab grown, every time.

What a falling price does mean:

  • Resale is weak, and that won't change. Your stone competes with whatever is cheaper next year. Buy a lab diamond to wear, not to store value.
  • The step up in grade costs less than it used to. When the whole curve is low, going from G to E colour or SI1 to VS1 clarity adds little in dollars. It also adds little you can see. Put a well-cut G next to a D in a ring and most people can't pick which is which across a table.
  • Grading still matters. A cheap stone with a weak cut looks dull at any price. Cut affects how a diamond looks more than colour or clarity does.
  • The setting is now a bigger share of the bill. With the stone cheaper, metal, labour and design make up more of what you pay. That is where quality shows up over years of wear.

Where to spend and where to save

If you're putting a ring together today, this is the order I'd go in:

  1. Pick the setting first. Browse engagement ring settings and choose the style and head size that suit the hand. Prong count, gallery height and band width affect daily wear more than a colour grade.
  2. Choose cut quality and a graded report before size. In the loose diamond search, filter for a top cut grade from a recognised lab, then compare sizes. Read the report, not just the listing.
  3. Stop at "eye clean" and near-colourless. In lab grown, D colour and flawless clarity often cost little more than lower grades. That still doesn't make them worth paying for if you can't see the difference. Spend the saving on carat weight or a better-made setting if those matter more to you.
  4. Don't hold out for the bottom of the market. The 2026 data shows prices falling more slowly, with 1 ct rounds flat to slightly up in Q2. Waiting another year might save a modest amount on the stone. It won't change how the ring looks.
  5. Finish the ring with the metal and fit you'll actually wear. On the complete ring page you choose the metal, size and engraving, and you can preview it in 3D before you order.

Here, the expensive option is mostly not worth it. A top-grade lab stone costs more now and will be worth less later, and nobody will see the extra grades on your hand. A well-cut, eye-clean, near-colourless stone in a solid setting is the better buy.

What evidence doesn't settle

Some of this can't be stated precisely, and I'd rather say so:

  • Wholesale indices track particular trading centres and certified goods. They don't measure Canadian retail prices, so they can't tell you what a given stone should cost in CAD.
  • Nobody knows where the floor is. Analysts describe prices as stabilising, while producers are consolidating and testing higher rough prices. Either trend could win out.
  • Grading involves judgement at every lab. Two reports can describe the same stone slightly differently, so compare stones from the same lab where you can.

What to do next

If you've decided on lab grown, use the lower price to buy a better cut and a well-made setting. Don't chase grades you can't see. Start with a setting you like, shortlist two or three stones from the diamond search with the same lab and cut grade, and compare them on the report and in the 3D preview. For more on certificates, colour and setting choices, see our other guides.

Sources