Reflections Craft
Sign In

· 9 min read

Old Mine Cut vs Old European Cut: A Jeweller's Guide

Old mine cut vs old European cut: how the squarish and round antique diamonds differ, how GIA reports them, what they cost and when a modern stone is fine.

The main difference between an old mine cut and an old European cut is the outline. An old mine cut is a soft, squarish cushion shape. An old European cut is round. Both are hand-cut antique brilliants with a high crown, a small table and a visible culet. The old European came later, as cutters learned to make diamonds round, and it is the direct ancestor of today's round brilliant. Which one suits you depends on whether you prefer a cushion or a round. If you are paying for a certain look, the wording on the grading report matters more than most people expect.

Where each cut comes from

The old mine cut

GIA's Old Mine Cut Diamond Guide (September 2025) dates the old mine cut "from the early 18th century to the late 19th century" and describes its "soft, squarish shape and distinct diamond proportions." It has 58 facets, the same count as a modern round brilliant, but they are arranged very differently. The name refers to the old diamond sources in India and Brazil. GIA's Antique Diamond Cuts article (September 2026) notes that these were the world's main sources "before massive South African discoveries transformed the industry forever."

GIA calls the old mine cut "the forerunner of today's modern cushion brilliant cut" in its article Cushion Cut Diamond: An Old and New Classic. That family link is useful when you start shopping, and we come back to it below.

The old European cut

GIA's Antique Diamond Cuts article calls the old European cut "the direct predecessor of the modern round brilliant". It says the cut became "the dominant round diamond cut from the late 19th century" onward and credits mechanised bruting with allowing "more consistent round shapes." Bruting is the process of grinding a diamond's outline round. GIA's own pages give slightly different years for the bruting machine (the 1870s, 1872 and 1873 all appear), so treat any single date as approximate. The old European cut also has 58 facets, set in a round outline with more symmetry than an old mine cut.

How they look side by side

On paper the two cuts share most features. In the hand they look different.

  • Outline. The old mine cut is squarish, sometimes a little rectangular or lopsided, with rounded corners. The old European cut is round.
  • Culet. Both have an open culet, a small flat facet at the bottom point that you can often see through the table as a little circle. GIA's guide says the old European cut is "distinctly round with a smaller culet," so the old mine cut's culet is usually the more visible of the two.
  • Light pattern. GIA describes old mine cuts as showing less brilliance but more fire, with "larger, chunkier facets" and a softer contrast pattern than a modern round. Old European cuts have the same broad, blocky flashes in a more even, round pattern.
  • Girdle. GIA notes that the girdle on an old mine cut "is often very thin in places." In practice that is true of many old European cuts too, and it affects how the stone should be set.
  • Individuality. Because cutters followed the rough by hand, GIA says "no two stones are exactly alike." A pair of old mine cuts that truly match is hard to find.
FeatureOld mine cutOld European cutModern round brilliantModern cushion
OutlineSquarish cushion, rounded cornersRoundRoundSquare to rectangular, curved sides
Main era (per GIA)Early 1700s to late 1800sDominant from late 1800sModernModern
CrownHighHighLowerVaries
TableSmallSmallLargerVaries
CuletLarge, visibleVisible, smaller than old mineUsually noneUsually none
GIA cut gradeNot assigned when designated (see below)Not assigned when designatedYes, Excellent to PoorNo overall cut grade for fancy shapes

The last column is general GIA practice for fancy shapes, not something specific to antique cuts.

How GIA reports these cuts, and why it matters

This is where buyers get caught out. GIA began giving cut grades to round brilliants in 2006. Old cuts measured against modern proportions came back looking poor, so the lab created separate descriptions for them.

According to National Jeweler's 2016 report "The ongoing debate over old cuts" by Michelle Graff, a stone must meet at least three of four criteria for GIA to call it an old European cut:

  1. Table size of 53% or less
  2. Crown angle of 40 degrees or more
  3. Lower half length of 60% or less
  4. Culet size of slightly large or larger

The same report says old European cuts receive no cut grade, because the lab recognises they "were not cut to the same standards" as modern rounds. Richard B. Drucker's 2019 GemGuide article Identifying and Valuing Old European Cut Diamonds lists the same four criteria. It also describes a second GIA category, "circular brilliant," for stones that miss the old European call but clearly were not cut to modern proportions. The criteria Drucker lists for that category are a lower half length of 65% or less, a star length of 50% or less, and a culet of medium or larger, with all three required. Drucker adds that if a cushion-shaped stone meets the same three-of-four test, "it will be labeled as old mine cut."

Here is the honest part. Trade sources are clear that this system does not satisfy everyone. Antique dealers quoted by National Jeweler argue the criteria are too narrow and that "circular brilliant" tells a buyer nothing about a stone's history. Drucker describes a 1.17 ct old European cut that was repolished to remove a girdle chip. It came back at 1.05 ct, now described as a round brilliant with a Poor cut grade, even though it still looked like an old European cut. GIA's Antique Diamond Cuts article also states that a GIA report "does not determine the diamond's age or when it was cut." The report describes proportions. It does not tell you how old the stone is.

What this means for you:

  • A report that says "circular brilliant" may still be a genuine antique stone that looks right. Judge it by eye before you dismiss it.
  • A report that says "old European cut" does not prove the stone is old. Drucker notes that some diamonds are newly cut to old European proportions on purpose, and GIA classifies them by proportions, not age.
  • A round brilliant report with a Fair or Poor cut grade on a stone sold as "antique" deserves questions. It may be a real old stone that missed the criteria, or simply a badly cut modern one.

Price: what the evidence shows, and what it does not

You will often hear that old cuts are a bargain. The data I could find does not support that as a general rule.

In his July/August 2019 GemGuide article, Drucker compared old European cuts with round brilliants across I to L colour and VS1 to SI1 clarity at one carat. In 2000 the old European cuts traded 15% to 26% below round brilliants. By 2019 the range was +5% to −6%. In other words, in those grades old European cuts had caught up with round brilliants and sometimes cost slightly more. He also found far fewer of them for sale. A RapNet search for GIA-graded old European cuts at 1.00 to 1.19 ct returned only 27 stones, against 682 comparable round brilliants with an excellent cut grade. These are US-market figures from 2019, seven years old, and I could not find a newer published comparison from an equivalent source. Do not treat them as today's prices. They are useful for one point: a scarce antique cut is not automatically cheaper, and in popular sizes it may not be cheaper at all.

I found no comparable published price series for old mine cuts, so I will not guess. Sellers often price them as their own category, and a well-matched or unusually white old mine cut can carry a premium.

Where you can genuinely save money:

  • Colour. Many antique stones sit in the near-colourless to faint range. The Edwardian ring GIA uses as an example has a 1.80 ct old mine cut graded I–J colour and SI1 clarity. The broad facets of an old cut tend to show warmth more than a modern round does, so some people prefer old cuts in warmer colours set in yellow gold. If that is the look you want, there is no reason to pay for D to F.
  • The report label. If a circular brilliant stone looks right to you, paying extra for the words "old European cut" on paper is not worth it.

Which one should you choose?

Choose an old mine cut if you like a cushion outline, soft corners and a slightly irregular, handmade character. Accept that its shape will rarely be perfectly symmetrical, and plan the setting around that stone. Prongs and a head made for a perfect square may not fit it.

Choose an old European cut if you want a round stone with the antique, chunky flash. It goes into standard round settings more easily, but its high crown and often thin girdle need careful prong work.

Choose a modern stone if what you really want is a vintage-style ring rather than an antique diamond. A modern cushion or round in an antique-style setting from our engagement ring settings costs less effort to source, comes with a cut grade for rounds, and is easy to match with side stones. It will not show the same broad, blocky light pattern as a true old cut, and if that pattern is the point, you should know that before you buy.

What to do next

  1. Decide on outline first. Square-ish or round settles old mine versus old European before anything else.
  2. Look at video, not just the report. The old-cut light pattern is the reason to buy one, and you can only judge it by seeing it move.
  3. Read the cutting style line on the report. Check whether it says old mine, old European, circular brilliant or round brilliant, and price the stone on how it looks, not the label.
  4. Ask about the girdle and any repairs. A thin or chipped girdle affects setting risk, and a repolish can change the report.
  5. Compare against modern stones. Browse our loose diamonds side by side so you know what an old cut is costing or saving you. Then finish the ring with metal, size and engraving once the stone is chosen.

For more on cut grades, report reading and shapes, see our other guides.

Sources